The MNLT Professional 1927nm Fractional Thulium Laser Machine is an advanced sub-ablative skin resurfacing and pigment clearance platform engineered for dermatology practices, medical aesthetic clinics, and high-volume medspas.
Operating at the optimal 1927nm infrared water-absorption peak, this system delivers dual-action clinical efficacy: controlled micro-vaporization of epidermal pigmentation (melasma, sun spots, freckles) paired with deep dermal photothermal coagulation (60°C–70°C) to stimulate rapid Type I and Type III collagen remodeling with minimal downtime (3–5 days). Featuring a modular dual-mode handpiece system (Precision Fractional Stamping Tip + Continuous Sliding Roller Tip), an exclusive touchscreen freehand drawing mode, a counterbalanced 360° rotating articulated light guide arm, and factory-calibrated energy output from 1 mJ to 300 mJ, it provides an uncompromising turnkey aesthetic solution backed by 19 years of medical manufacturing excellence.
The MNLT Professional 1927nm Fractional Thulium Laser Machine is a medical-grade sub-ablative skin rejuvenation and epidermal pigment remodeling workstation utilizing a solid-state thulium optical fiber laser source emitting at 1927nm. Because water is the primary target chromophore at this wavelength—displaying an absorption coefficient approximately ten times higher than 1550nm Erbium-glass—photons are rapidly absorbed within the epidermis and superficial papillary dermis, converting instantly into controlled thermal energy (60°C–70°C). This mechanism induces micro-fractional coagulation columns (Microscopic Treatment Zones - MTZs) while leaving the stratum corneum intact as a biological sterile dressing, allowing aesthetic clinicians to achieve effective melasma clearance, pore tightening, wrinkle reduction, and "BB laser" radiant skin resurfacing across Fitzpatrick skin types I–IV without the prolonged downtime or high PIH risk associated with ablative CO2 lasers.
The MNLT Professional 1927nm Fractional Thulium Laser bridges the long-standing clinical divide between gentle non-ablative toning and aggressive ablative CO2 skin resurfacing. Engineered specifically for commercial aesthetic practices, plastic surgery recovery suites, and premier dermatology clinics, this medical-grade platform delivers dramatic pigment clearance and neocollagenesis while maintaining a brief, client-friendly recovery window of just 3 to 5 days.
While traditional 10,600nm CO2 lasers completely vaporize the protective epidermal barrier—imposing 7 to 14 days of painful weeping downtime and substantial post-inflammatory hyperpigmentation (PIH) risks—the MNLT 1927nm Thulium system preserves the stratum corneum. Microscopic Epidermal Necrotic Debris (MENDs) form beneath an intact surface and shed naturally within days. Backed by 19 years of precision electro-optical manufacturing from Shandong Moonlight Electronics Tech Co., Ltd., this commercial workstation integrates dual interchangeable handpieces, an intuitive surgeon-level freehand touch drawing interface, a balanced 360° light guide arm, and zero consumable requirements to maximize practice profitability.
Whether integrating this workstation alongside picosecond pigment clearance systems or expanding from AI multispectral skin analysis platforms, explore our clinical parameter benchmarks and factory direct procurement programs to elevate clinical outcomes across your treatment suites.
Understanding the chromophore absorption dynamics of the 1927nm infrared spectrum is essential for establishing safe, repeatable clinical protocols:
Equipped with two modular quick-disconnect applicator handpieces:
Eliminate the limitations of rigid geometric scanning fields. Through the integrated 12-inch medical-grade capacitive console, practitioners can outline custom scanning boundaries directly on screen using a fingertip or stylus. This provides unmatched safety when treating irregular anatomical boundaries, such as periorbital crow’s-feet, nasal alar margins, and uneven surgical scar margins.
Fine-tune thermal delivery to match client skin tolerance and lesion depth. Pulse energy is adjustable from 1 mJ to 300 mJ in precise 1 mJ steps, while pulse duration is configurable from 0.1 ms to 20 ms. This broad parameter window allows operators to switch seamlessly between superficial brightening (“BB Laser” glow) and deep dermal scar coagulation.
The software suite provides pre-configured geometric scanning patterns (circle, square, rectangle, triangle, hexagon) with scalable dimensions up to 15.0 mm × 15.0 mm. An integrated Random Scanning Mode scatters micro-pulses in pseudo-random sequences, preventing heat concentration in adjacent tissue zones and significantly reducing treatment discomfort.
The optical fiber transmission line is supported by an industrial counterbalanced 360-degree rotating articulated arm. This ergonomic suspension neutralizes handpiece cable drag, ensuring zero operator wrist fatigue during intensive, back-to-back commercial treatment schedules.
Built with high-efficiency multi-fan heat dissipation grilles, internal air ducting, and a dedicated closed-loop refrigeration circuit. The chassis evacuates internal optical heat continuously, guaranteeing flat, drift-free pulse energy discharge across 10 to 12 consecutive hours of clinic operation.
The unit is housed in a sleek, reinforced steel-aluminum enclosure (31 kg net weight) mounted on four medical-grade industrial casters with step-locks. Every system ships pre-calibrated inside an export-grade reinforced aluminum flight transport case (83 cm × 58 cm × 129 cm; gross weight: 54.5 kg), ensuring complete transit protection worldwide.
The following technical metrics represent certified manufacturing specifications from the MNLT engineering department for Model MNLT-TM-1927:
| Engineering Parameter | Certified Manufacturing Specification |
|---|---|
| Laser Source & Wavelength | 1927 nm Solid-State Infrared Thulium Optical Fiber Laser |
| Operating Modalities | Dual-Action: Sub-Ablative Epidermal Vaporization + Dermal Thermal Coagulation |
| Pulse Energy Output | 1 mJ to 300 mJ (Precision adjustable in 1 mJ increments) |
| Pulse Width (Duration) | 0.1 ms to 20 ms (Fine thermal relaxation time control) |
| Dot Pitch (Spot Spacing) | 0.1 mm to 2.0 mm (Adjustable micro-beam treatment density) |
| Applicator Handpieces | Modular Dual Handpiece: ① Precision Fractional Stamping Tip + ② Sliding Roller Tip |
| Scanning Beam Modes | Sequential Scanning, Random Order Anti-Stacking, and Exclusive Touchscreen Freehand Mode |
| Scan Geometries | Circle, Square, Rectangle, Triangle, Hexagon, and Stylus Freehand Contours |
| Maximum Scanning Field | Up to 15.0 mm × 15.0 mm per single scanning field |
| Beam Delivery System | 360° Rotating Counterbalanced Light Guide Arm with Secure Rest Cradle |
| Operator Display Interface | 12.0-Inch High-Definition Medical Capacitive Touchscreen Console |
| Cooling System Architecture | Reinforced Multi-Fan Forced Air-Cooling & Internal Refrigeration System |
| Machine Dimensions & Weight | 81 cm × 55 cm × 126 cm | Net Instrument Weight: 31 kg |
| Flight Case Packaging | Reinforced Aluminum Transport Case: 83 cm × 58 cm × 129 cm | Gross Weight: 54.5 kg |
| Electrical Power Requirements | AC 110V/60Hz (North America) / AC 220V–240V/50Hz (International Standard), Max 800W |
| Regulatory Compliance | CE Certified, ISO 13485 Medical Device QMS Audited, RoHS Compliant |
The versatility of the 1927nm Thulium wavelength allows aesthetic operators to treat a diverse spectrum of superficial epidermal and upper dermal concerns:
Upgrade your aesthetic practice with certified optical precision directly from Shandong Moonlight Electronics. Request full clinical treatment protocols, technical data sheets, and ex-factory quotation packages today.
Traditional 10,600nm CO2 lasers are fully ablative, completely stripping the stratum corneum and creating open wounds that mandate 7 to 14 days of downtime, accompanied by significant oozing and high post-inflammatory hyperpigmentation (PIH) risks in darker skin types. The MNLT 1927nm Thulium laser is sub-ablative: it preserves the stratum corneum as a sterile biological barrier while delivering deep thermal coagulation. Recovery is reduced to mild erythema and fine micro-crusts lasting only 3 to 5 days, making it exceptionally safe across Fitzpatrick skin types I through IV.
The dual handpiece system optimizes both clinical precision and operational workflow. The Precision Fractional Handpiece utilizes stationary stamping micro-beams for targeted scar revision, localized melasma patches, and deep perioral lines. The Continuous Sliding Roller Handpiece glides smoothly over large facial, neck, or décolletage zones, completing full-face rejuvenation in just 12 to 15 minutes, allowing clinics to double treatment room turnover.
Conventional laser scanners restrict operators to rigid geometric shapes like squares or circles. The MNLT 12-inch interface features an exclusive Freehand Drawing Mode where clinicians use a fingertip or stylus to trace custom boundaries directly on screen. This allows energy to be directed precisely around irregular anatomical zones (such as periorbital crow's-feet, nasal curves, or uneven scar margins) while shielding adjacent delicate tissues.
No. The MNLT 1927nm Thulium system operates with zero proprietary consumable costs. There are no shot-counter lockouts, single-use RFID chips, or mandatory proprietary tip replacements. Clinics utilize standard topical anesthetic and post-treatment soothing serums, retaining approximately 95% of treatment fee revenues as gross operating margin.
In North American and European aesthetic clinics, full-face 1927nm Thulium sessions ("BB Laser" treatments) command between $400 and $800 USD, while multi-session corrective packages for melasma or acne scarring range from $1,200 to $2,500 USD. Performing just 2 to 3 sessions daily enables commercial practices to achieve full capital payback within 2 to 3 months of deployment.
A trustworthy beauty equipment manufacturer
